Click image to view full size image
X5 speedmaster
We know the needs of users of high-speed carving, developed a new generation X5 Speed Master linear high-speed models, using high-frequency water-cooled spindle axis, the standard speed of up to 24000RPM. As a new generation of improved engraving and milling machine, is a sculpture, engraving and milling multifunctional processing of carving and milling machine tools. widely used in industrial mold manufacturing, parts processing, seal industry, trade signs, nameplate manufacturing. At the same time low cost and ease of use is also widely reflected in this model. This machine type linear guide drive, high speed, high precision. Users can also switch to use high-speed spindle 38,000. while increasing the casting base to further improve the machine stability.
Feature
|
-Ultra high precision linear rails |
|
-The table size -522 x 160mm |
|
-24,000 Precision high-speed water-cooled spindle transfer |
|
-With 220V single-phase AC inverter |
|
-Pre-installed high-speed cooling fan 1 x 120mm |
|
-Selection of high-quality casting materials, compact |
|
-High torque stepper motor axis |
|
-220V single-phase AC power supply |
|
-Integrated casting base (optional), to further increase the stability of machine tools |
|
-Imported from Taiwan OEM PMI double nut ball screw Intime |
|
-Safety electrical components of high quality and fast plug |
|
-Taiwan's imports of hiwin linear |
|
-Manual lubrication system pre-installed to protect the rail life |
|
-Dual cooling system pre-installed standard base |
|
-Pre-installed fourth axis fast interface |
|
-Pre-installed computer stand |
|
-CE and CCC safety certification |
|
Specification |
|
|
Package dimensions (L x W x H) |
- 950mm x 840mm x 1150mm |
|
Dimensions (L x W x H) |
- 920mm x 790mm x 950mm |
|
Table size |
- 522mm x 160mm |
|
T-slot size |
- 12mm |
|
Weight |
- 350 ~ 450kg |
|
Working travel |
- X-axis: 280mm |
|
Input voltage |
- 220v single phase AC |
|
Positioning accuracy |
- ≤ 0.01mm |
|
Spindle Speed |
- 8000 ~ 24000rpm/min |
|
Spindle Power |
- 0.75kw |
|
Spindle taper |
- ER11 |
|
Clamping tool diameter can be |
- 4 ~ 16mm |
|
Motor torque |
- X-axis stepper motor: 6.0Nm |
|
Feed rate |
- X / Y axis: 3000mm/Min - Z-axis: 2000mm/Min |
|
Ball Screw |
- P5 Level Double nut ball screw PMI |
|
Linear guideway |
- HIWIN OEM high precision linear |
|
Output port |
- the standard 25-pin parallel port printing |
